-
Read more
Manufactured in the UK since 1840 by the same factory. These can be used for pendants with shade or bare bulbs. Upgrade an existing lamp, they have a M10 ( 10mm ) thread which is a direct swap for most table lamp / wall lamps.
Shade rings are compatible with old bayonet lamp fittings and modern shades.
Each holder has a brass body which is then electroplated. Internally is an earthed cast bakelite wiring block. They are extremely high quality and are heavy to the hand.
Please note, some images may include our Dyke & Dean logo as a watermark which does not appear on the product itself and that some colours and finishes may vary due to screen calibration.The lamp holder comes complete with a cable grip in black and two shade rings.
64.5mm High x 31.5mm Diameter
Shade Ring Threaded Diameter 28mm
240V - E14 Screw Bulb Holder
Manufactured in the UK since 1840 by the same factory. These can be used for pendants with shade or bare bulbs. Upgrade an existing lamp, they have a M10 ( 10mm ) thread which is a direct swap for most table lamp / wall lamps.
Shade rings are compatible with old bayonet lamp fittings and modern shades.
Each holder has a brass body which is then electroplated. Internally is an earthed cast bakelite wiring block. They are extremely high quality and are heavy to the hand.
Please note, some images may include our Dyke & Dean logo as a watermark which does not appear on the product itself and that some colours and finishes may vary due to screen calibration.The lamp holder comes complete with a cable grip in black and two shade rings.
64.5mm High x 31.5mm Diameter
Shade Ring Threaded Diameter 28mm
240V - E14 Screw Bulb Holder
-
All of our stocked items are shipped on a 48 hour tracked service within the UK.
World wide shipping is fully tracked and delivery times are dependant on available services.
International customers will be liable to pay customs and duties once your order reaches your country's border.
All lead times quoted are for delivery to mainland UK, if ordering outside of this area there will be an additional transit time relevant to your destination.
Lead times are subject to change at any time due to manufacturers, these are out of our control but we will do our best to keep you up to date with any change in lead times and ETAs.
Pallet shipping, bespoke rates and services for trade orders availiable.
More information about lead times for our bespoke and made to order pieces can be found in the individual product descriptions.
We advise you do not book a plumber/electrician until your item has arrived.
-
Our returns policy lasts for 14 days. If 14 days have gone by since your purchase has been delivered, unfortunately we cannot offer you a refund or exchange.
Goods / Returns must be received to Dyke & Dean within 14 days of being delivered to you. If Goods / Returns are received after this we will not issue a refund. Notification to our office of your return via telephone, email, fax and or letter within 14 days does not mean a refund will be given. A refund will only be reviewed if the Goods / Returns are received within 14 days to our possession.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging. Customers are responsible for the delivery costs of returning the goods.
Bespoke/Made to order products, cut lengths of fabric cable under 100m and Outlet items are non-returnable.
CHROME E14 HEAVY METAL BULB HOLDER
-
Read more
Manufactured in the UK since 1840 by the same factory. These can be used for pendants with shade or bare bulbs. Upgrade an existing lamp, they have a M10 ( 10mm ) thread which is a direct swap for most table lamp / wall lamps.
Shade rings are compatible with old bayonet lamp fittings and modern shades.
Each holder has a brass body which is then electroplated. Internally is an earthed cast bakelite wiring block. They are extremely high quality and are heavy to the hand.
Please note, some images may include our Dyke & Dean logo as a watermark which does not appear on the product itself and that some colours and finishes may vary due to screen calibration.The lamp holder comes complete with a cable grip in black and two shade rings.
64.5mm High x 31.5mm Diameter
Shade Ring Threaded Diameter 28mm
240V - E14 Screw Bulb Holder
Manufactured in the UK since 1840 by the same factory. These can be used for pendants with shade or bare bulbs. Upgrade an existing lamp, they have a M10 ( 10mm ) thread which is a direct swap for most table lamp / wall lamps.
Shade rings are compatible with old bayonet lamp fittings and modern shades.
Each holder has a brass body which is then electroplated. Internally is an earthed cast bakelite wiring block. They are extremely high quality and are heavy to the hand.
Please note, some images may include our Dyke & Dean logo as a watermark which does not appear on the product itself and that some colours and finishes may vary due to screen calibration.The lamp holder comes complete with a cable grip in black and two shade rings.
64.5mm High x 31.5mm Diameter
Shade Ring Threaded Diameter 28mm
240V - E14 Screw Bulb Holder
-
All of our stocked items are shipped on a 48 hour tracked service within the UK.
World wide shipping is fully tracked and delivery times are dependant on available services.
International customers will be liable to pay customs and duties once your order reaches your country's border.
All lead times quoted are for delivery to mainland UK, if ordering outside of this area there will be an additional transit time relevant to your destination.
Lead times are subject to change at any time due to manufacturers, these are out of our control but we will do our best to keep you up to date with any change in lead times and ETAs.
Pallet shipping, bespoke rates and services for trade orders availiable.
More information about lead times for our bespoke and made to order pieces can be found in the individual product descriptions.
We advise you do not book a plumber/electrician until your item has arrived.
-
Our returns policy lasts for 14 days. If 14 days have gone by since your purchase has been delivered, unfortunately we cannot offer you a refund or exchange.
Goods / Returns must be received to Dyke & Dean within 14 days of being delivered to you. If Goods / Returns are received after this we will not issue a refund. Notification to our office of your return via telephone, email, fax and or letter within 14 days does not mean a refund will be given. A refund will only be reviewed if the Goods / Returns are received within 14 days to our possession.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging. Customers are responsible for the delivery costs of returning the goods.
Bespoke/Made to order products, cut lengths of fabric cable under 100m and Outlet items are non-returnable.