-
Read moreNo big deal..... We have made a mini-ITX PC chassis that we call the computer–1.A simple, no frills computer.NOTE: COMPUTER–1 IS A PC CASE ONLY, COMPUTER COMPONENTS ARE PURCHASED SEPARATELY.Years ago, when we started, we couldn't find a pc case for our own builds. so we made our own using a laser cutter, 6 mm high density board and spray paint. it was assembled and held together by simple wooden plugs.it worked ok for what it was designed for.unfortunately, the handles couldn't supportthe weight of the unit when moving it around.
A couple of literal computer crashes later, we turned to a lighter and sturdier design using aluminium. we'll always continue to iterate on the design, but here we are. it's not a ground-breaking pc case, but we like it, and use it everyday. now we'd like to share it with you.a flat pack, sheet metal computer case with the same build-it-yourself design as our modular series. the case has a small desk foot print and is built around the mini-ITX motherboard and the sfx power supply format. it also fits a dual slot graphics card up to 180mm. available in pure orange RAL 2004. note: the computer–1 is a pc case only, computer components must be bought separately.
- power supply: sfx
- form factor: mini-ITX
- gpu: dual-slot up to 180 mm
- build-it-yourself flat pack design
- small desktop footprint
A small desk footprint.
Computer–1 takes up minimum desk space, making more room for the projects you have at hand. while compact, it's capable of housing a wide range of components to fit your needs, whether you are a teenager or a banker.
the lightweight aluminium, and chrome handles, make it easy to move your machine around whenever you need to. with its pure orange RAL 2004 powder coated finish, it's a small, no frills tool for any desktop.Build-it-yourself.The build-it-yourself flat pack design is based on the same technique we use in our modular series. the powder coated 1 mm aluminium is flexible enough to bend into shape, and sturdy enough to keep your components secure.each kit comes with all of the parts* required to assemble the case. inside you'll find everything from the aluminum sheets to an illustrated build guide with instructions and bend angles. just remember: think twice, bend once!form factor
mini-ITX
gpudual-slot up to 180 mm
power supplysfx
cpu cooler height limit from motherboard surface 120 mm
materialpowder coated aluminium
colorpure orange RAL 2004outer dimensions (mm)
W 170 D 190* H 322**
*FRONT PANEL SWITCH PROTRUDES 10 MM, CABLING TYPICALLY NEEDS MINIMUM 50 MM SPACE AT THE BACK.
**285 MM WITHOUT HANDLES.
Inner Dimensions (mm)
W 164 D 189 H 275.5
width from motherboard to case 147 mm
approximate width from motherboard to case fan* 120 mm
*DEPENDS ON CASE FAN THICKNESS.
Allow 2 weeks for delivery.
Please note, some images may include our Dyke & Dean logo as a watermark which does not appear on the product itself and that some colours and finishes may vary due to screen calibration.No big deal..... We have made a mini-ITX PC chassis that we call the computer–1.A simple, no frills computer.NOTE: COMPUTER–1 IS A PC CASE ONLY, COMPUTER COMPONENTS ARE PURCHASED SEPARATELY.Years ago, when we started, we couldn't find a pc case for our own builds. so we made our own using a laser cutter, 6 mm high density board and spray paint. it was assembled and held together by simple wooden plugs.it worked ok for what it was designed for.unfortunately, the handles couldn't supportthe weight of the unit when moving it around.
A couple of literal computer crashes later, we turned to a lighter and sturdier design using aluminium. we'll always continue to iterate on the design, but here we are. it's not a ground-breaking pc case, but we like it, and use it everyday. now we'd like to share it with you.a flat pack, sheet metal computer case with the same build-it-yourself design as our modular series. the case has a small desk foot print and is built around the mini-ITX motherboard and the sfx power supply format. it also fits a dual slot graphics card up to 180mm. available in pure orange RAL 2004. note: the computer–1 is a pc case only, computer components must be bought separately.
- power supply: sfx
- form factor: mini-ITX
- gpu: dual-slot up to 180 mm
- build-it-yourself flat pack design
- small desktop footprint
A small desk footprint.
Computer–1 takes up minimum desk space, making more room for the projects you have at hand. while compact, it's capable of housing a wide range of components to fit your needs, whether you are a teenager or a banker.
the lightweight aluminium, and chrome handles, make it easy to move your machine around whenever you need to. with its pure orange RAL 2004 powder coated finish, it's a small, no frills tool for any desktop.Build-it-yourself.The build-it-yourself flat pack design is based on the same technique we use in our modular series. the powder coated 1 mm aluminium is flexible enough to bend into shape, and sturdy enough to keep your components secure.each kit comes with all of the parts* required to assemble the case. inside you'll find everything from the aluminum sheets to an illustrated build guide with instructions and bend angles. just remember: think twice, bend once!form factor
mini-ITX
gpudual-slot up to 180 mm
power supplysfx
cpu cooler height limit from motherboard surface 120 mm
materialpowder coated aluminium
colorpure orange RAL 2004outer dimensions (mm)
W 170 D 190* H 322**
*FRONT PANEL SWITCH PROTRUDES 10 MM, CABLING TYPICALLY NEEDS MINIMUM 50 MM SPACE AT THE BACK.
**285 MM WITHOUT HANDLES.
Inner Dimensions (mm)
W 164 D 189 H 275.5
width from motherboard to case 147 mm
approximate width from motherboard to case fan* 120 mm
*DEPENDS ON CASE FAN THICKNESS.
Allow 2 weeks for delivery.
Please note, some images may include our Dyke & Dean logo as a watermark which does not appear on the product itself and that some colours and finishes may vary due to screen calibration.
-
All of our stocked items are shipped on a 48 hour tracked service within the UK.
World wide shipping is fully tracked and delivery times are dependant on available services.
International customers will be liable to pay customs and duties once your order reaches your country's border.
All lead times quoted are for delivery to mainland UK, if ordering outside of this area there will be an additional transit time relevant to your destination.
Lead times are subject to change at any time due to manufacturers, these are out of our control but we will do our best to keep you up to date with any change in lead times and ETAs.
Pallet shipping, bespoke rates and services for trade orders availiable.
More information about lead times for our bespoke and made to order pieces can be found in the individual product descriptions.
We advise you do not book a plumber/electrician until your item has arrived.
-
Our returns policy lasts for 14 days. If 14 days have gone by since your purchase has been delivered, unfortunately we cannot offer you a refund or exchange.
Goods / Returns must be received to Dyke & Dean within 14 days of being delivered to you. If Goods / Returns are received after this we will not issue a refund. Notification to our office of your return via telephone, email, fax and or letter within 14 days does not mean a refund will be given. A refund will only be reviewed if the Goods / Returns are received within 14 days to our possession.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging. Customers are responsible for the delivery costs of returning the goods.
Bespoke/Made to order products, cut lengths of fabric cable under 100m and Outlet items are non-returnable.
COMPUTER–1
-
Read moreNo big deal..... We have made a mini-ITX PC chassis that we call the computer–1.A simple, no frills computer.NOTE: COMPUTER–1 IS A PC CASE ONLY, COMPUTER COMPONENTS ARE PURCHASED SEPARATELY.Years ago, when we started, we couldn't find a pc case for our own builds. so we made our own using a laser cutter, 6 mm high density board and spray paint. it was assembled and held together by simple wooden plugs.it worked ok for what it was designed for.unfortunately, the handles couldn't supportthe weight of the unit when moving it around.
A couple of literal computer crashes later, we turned to a lighter and sturdier design using aluminium. we'll always continue to iterate on the design, but here we are. it's not a ground-breaking pc case, but we like it, and use it everyday. now we'd like to share it with you.a flat pack, sheet metal computer case with the same build-it-yourself design as our modular series. the case has a small desk foot print and is built around the mini-ITX motherboard and the sfx power supply format. it also fits a dual slot graphics card up to 180mm. available in pure orange RAL 2004. note: the computer–1 is a pc case only, computer components must be bought separately.
- power supply: sfx
- form factor: mini-ITX
- gpu: dual-slot up to 180 mm
- build-it-yourself flat pack design
- small desktop footprint
A small desk footprint.
Computer–1 takes up minimum desk space, making more room for the projects you have at hand. while compact, it's capable of housing a wide range of components to fit your needs, whether you are a teenager or a banker.
the lightweight aluminium, and chrome handles, make it easy to move your machine around whenever you need to. with its pure orange RAL 2004 powder coated finish, it's a small, no frills tool for any desktop.Build-it-yourself.The build-it-yourself flat pack design is based on the same technique we use in our modular series. the powder coated 1 mm aluminium is flexible enough to bend into shape, and sturdy enough to keep your components secure.each kit comes with all of the parts* required to assemble the case. inside you'll find everything from the aluminum sheets to an illustrated build guide with instructions and bend angles. just remember: think twice, bend once!form factor
mini-ITX
gpudual-slot up to 180 mm
power supplysfx
cpu cooler height limit from motherboard surface 120 mm
materialpowder coated aluminium
colorpure orange RAL 2004outer dimensions (mm)
W 170 D 190* H 322**
*FRONT PANEL SWITCH PROTRUDES 10 MM, CABLING TYPICALLY NEEDS MINIMUM 50 MM SPACE AT THE BACK.
**285 MM WITHOUT HANDLES.
Inner Dimensions (mm)
W 164 D 189 H 275.5
width from motherboard to case 147 mm
approximate width from motherboard to case fan* 120 mm
*DEPENDS ON CASE FAN THICKNESS.
Allow 2 weeks for delivery.
Please note, some images may include our Dyke & Dean logo as a watermark which does not appear on the product itself and that some colours and finishes may vary due to screen calibration.No big deal..... We have made a mini-ITX PC chassis that we call the computer–1.A simple, no frills computer.NOTE: COMPUTER–1 IS A PC CASE ONLY, COMPUTER COMPONENTS ARE PURCHASED SEPARATELY.Years ago, when we started, we couldn't find a pc case for our own builds. so we made our own using a laser cutter, 6 mm high density board and spray paint. it was assembled and held together by simple wooden plugs.it worked ok for what it was designed for.unfortunately, the handles couldn't supportthe weight of the unit when moving it around.
A couple of literal computer crashes later, we turned to a lighter and sturdier design using aluminium. we'll always continue to iterate on the design, but here we are. it's not a ground-breaking pc case, but we like it, and use it everyday. now we'd like to share it with you.a flat pack, sheet metal computer case with the same build-it-yourself design as our modular series. the case has a small desk foot print and is built around the mini-ITX motherboard and the sfx power supply format. it also fits a dual slot graphics card up to 180mm. available in pure orange RAL 2004. note: the computer–1 is a pc case only, computer components must be bought separately.
- power supply: sfx
- form factor: mini-ITX
- gpu: dual-slot up to 180 mm
- build-it-yourself flat pack design
- small desktop footprint
A small desk footprint.
Computer–1 takes up minimum desk space, making more room for the projects you have at hand. while compact, it's capable of housing a wide range of components to fit your needs, whether you are a teenager or a banker.
the lightweight aluminium, and chrome handles, make it easy to move your machine around whenever you need to. with its pure orange RAL 2004 powder coated finish, it's a small, no frills tool for any desktop.Build-it-yourself.The build-it-yourself flat pack design is based on the same technique we use in our modular series. the powder coated 1 mm aluminium is flexible enough to bend into shape, and sturdy enough to keep your components secure.each kit comes with all of the parts* required to assemble the case. inside you'll find everything from the aluminum sheets to an illustrated build guide with instructions and bend angles. just remember: think twice, bend once!form factor
mini-ITX
gpudual-slot up to 180 mm
power supplysfx
cpu cooler height limit from motherboard surface 120 mm
materialpowder coated aluminium
colorpure orange RAL 2004outer dimensions (mm)
W 170 D 190* H 322**
*FRONT PANEL SWITCH PROTRUDES 10 MM, CABLING TYPICALLY NEEDS MINIMUM 50 MM SPACE AT THE BACK.
**285 MM WITHOUT HANDLES.
Inner Dimensions (mm)
W 164 D 189 H 275.5
width from motherboard to case 147 mm
approximate width from motherboard to case fan* 120 mm
*DEPENDS ON CASE FAN THICKNESS.
Allow 2 weeks for delivery.
Please note, some images may include our Dyke & Dean logo as a watermark which does not appear on the product itself and that some colours and finishes may vary due to screen calibration.
-
All of our stocked items are shipped on a 48 hour tracked service within the UK.
World wide shipping is fully tracked and delivery times are dependant on available services.
International customers will be liable to pay customs and duties once your order reaches your country's border.
All lead times quoted are for delivery to mainland UK, if ordering outside of this area there will be an additional transit time relevant to your destination.
Lead times are subject to change at any time due to manufacturers, these are out of our control but we will do our best to keep you up to date with any change in lead times and ETAs.
Pallet shipping, bespoke rates and services for trade orders availiable.
More information about lead times for our bespoke and made to order pieces can be found in the individual product descriptions.
We advise you do not book a plumber/electrician until your item has arrived.
-
Our returns policy lasts for 14 days. If 14 days have gone by since your purchase has been delivered, unfortunately we cannot offer you a refund or exchange.
Goods / Returns must be received to Dyke & Dean within 14 days of being delivered to you. If Goods / Returns are received after this we will not issue a refund. Notification to our office of your return via telephone, email, fax and or letter within 14 days does not mean a refund will be given. A refund will only be reviewed if the Goods / Returns are received within 14 days to our possession.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging. Customers are responsible for the delivery costs of returning the goods.
Bespoke/Made to order products, cut lengths of fabric cable under 100m and Outlet items are non-returnable.